Utilization of Waste Plastic Materials in Road Construction
DOI:
https://doi.org/10.53555/nnmce.v3i3.321Keywords:
biodegradable, conventional, environmental, material, normallyAbstract
Plastics are user friendly but not eco-friendly as they are non biodegradable. Generally it is disposed by way of land filling or incineration of materials which is extremely risky. This waste plastic can be partially mixed with material use for road construction. In conventional road making process bitumen is used as binder. Such bitumen can be modified with waste plastic pieces. This waste plastic modified bitumen mix shows better binding property, stability, density and more resistant to water. Worldwide use of waste material in road construction is being increasingly encouraged so as to reduce environmental impact. The use of this innovative technology will strengthen the road construction and increase the road life as well as will help to utilization of waste plastic material. Plastic roads would be a blessing for hot and extremely humid climate, where temperatures normally cross 50°C and abundant rains create damage, leaving most of the roads with big potholes. The main aim of this study is to focus on using the available waste/recycled plastic materials and waste rubber tires present in abundant that can be used economically and conveniently. Using this technique for road construction proves ecofriendly, economical and use of plastic will also give strength in the sub-base course of the pavement.
References
M. S. Ahmad, “Low Density Polyethylene Modified Dense Graded Bituminous Macadam” International Journal of Engineering Trends and Technology (IJETT) – Vol.16 No. 8 Oct 2014.
T. K. Bandopandhyay, (Jan.-Mar. 2010) “Construction of Asphalt Road with Plastic Waste”, Indian Center for Plastic in Environment (ICPE), ENVIS – Eco- Echoes, Vol.11, Issue 1.
N.D. Bariaya, “Use of waste rubber tyres in constructions of bituminous roads-An Overview”, International Journal of Application or Innovation In Engineering & Management (IJAIEM), Volume 2, Issue 7, July 2013 ISSN 2319 – 4847.
A. J. Chavan, (2013) “Use of plastic waste in flexible pavements” International Journal of application or innovation in engineering and management ISSN 2319 – 4847 Vol.2, Issue 4, April 2013.
R. Chhabra, S. Marik ,(2014) “A Review Literature On The Use Of Waste Plastics And Waste Rubber Tyres In Pavement.” International Journal of Core Engineering & Management (IJCEM) VOL. 1, Issue 1, April 2014.
A. N. Dhodapkar, (Dec. 2008), “Use of waste plastic in road construction.” Indian Highways, Technical paper journal, pp.31-32.
A. P. Gawande, (2013) “Economics and viability of plastic road: a review.” Journal of current chemical and pharmaceutical sciences ISSN 2277-2871, 2013, pp: 231-242.
A. P. Gawande, G. S. Zamre, V. C. Renge, G. R. Bharsakalea, S. tayde, (2012) “Utilization of waste plastic in asphalting of roads.” Scientific Reviews and Chemical Communications, ISSUE: 2(2) 2012,pp. 147-157
A. R. Hill, A. R. Dawson, M. Mundy, (2001),“Utilization of aggregate materials in road construction and bulk fill.” Resources,
Conservation and Recycling, Vol. 32, School of Civil Engineering, University of Nottingham, Australia, pp 305–320.
R. B. Bird, O. Heidrich, (2007) “A Review of the Use of Recycled Solid Waste Materials in Asphalt Pavements Resources, Conservation and Recycling, 52, 58-73 (2007).
P. K. Jain, S. Kumar, J. K. Sengupta (2011) “Mitigation of rutting in bituminous roads by use of waste polymeric packaging materials” Indian Journal of Engineering & Materials Sciences Vol.18, June 2011, pp. 233-238.
J. R. Jimenez, (2011), “Utilization of unbound recycled aggregates from selected CDW in unpaved rural roads”, Resources, Conservation and Recycling, Vol. 58, Construction Engineering Area, University of Córdoba, Córdoba, Spain, pp:88– 97.
G.N. King, , H.W. Muncy, J.B. Prudhome, “ Polymer Modification: Binder’s Effect on Mix Properties”, Proceedings of the Association of Asphalt Paving Technologists(AAPT), Vol. 55 , 1986 pp:519-540.
S. Kazmi, D. G. Rao (2015) “Utilization of Waste Plastic Materials as Bitumen-Blends for Road Construction in Oman.” Scholars Journal of Engineering and Technology (SJET) 2015; pp: 9-13.
A. M. Othman (2010) “Effect of low-density polyethylene on fracture toughness.” Journal of Materials in Civil Engineering, 1019-1024.
V. S. Punith, A. Veeraragavan (2011) “Behavior of Reclaimed Polyethylene Modified.” Journal of Materials in Civil Engineering, pp:833-845.
V. Patel, (2014) “Utilization of Plastic Waste in Construction of Roads.” International journal of scientific research ISSN No 2277 – 8179 Vol: 3,Issue: 4 April 2014.
Panda, M., Muzumdar, M. “Development and Evaluation of a Bituminous Paving Binder Containing Reclaimed Polyethylene”, Indian Highways, Indian Roads Congress, New Delhi, Vol. 25(5), 1997
V. S. Punith, A. Veeraraghavan, Laboratory Fatigue Studies on Bituminous Concrete Mixed Utilizing Waster Shredded Plastic Modifier, Proceedings of 21st ARRB Transport Research (ARRB) and 11th Road Engineering Association and Australia (REAAA) Conference, Caims, Australia, May 19-23 (2003).
D. Qiao (2010), “Utilization of sulfate-rich solid wastes in rural road construction in the Three Gorges Reservoir”, Resources, Conservation and Recycling, Vol.54, College of Materials Science and Engineering, Chongqing University, China, pp: 1368–1376.
P. B. Rajmane, A. K. Gupta, D. B. Desai, “Effective Utilization of Waste Plastic In Construction of Flexible Pavement For Improving Their Performance.” Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2278-1684, pp: 27-30.
S. Rokade, “Use of Waste Plastic and Waste Rubber Tires in Flexible Highway Pavements,” 2012 International Conference on Future Environment and Energy(IPCBEE), vol.28(2012), IACSIT press, Singapoore.
S. Rajasekaran, S. Paulraj, R. Vasudevan, (2013).“Reuse of Waste Plastics Coated Aggregates-Bitumen Mix Composite For Road Application – Green Method.” American Journal of Engineering Research (AJER) e-ISSN: 2320 0847 p-ISSN: 2320-0936 Vol, 02, Issue-11, pp-01-13 www.ajer.org.
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Terms & Condition
Submission -
Author can submit the manuscript through our online submission process or email us at the designated email id in contact details.
The other mode of submission not accepted than online and email.
Before submission please read the submission guidelines.
NN Publication accepts only article submitted in pdf/doc/docx/rtf file format. Another format except given file formats will no be considered .
Author will be responsible for the error mistakes in the submission files. The minor changes can be done without any cost after publication. But for major changes NN Publication may charges you the editing charges.
Publication (Online) -
The online publication is scheduled on last date of every month, but it can be delayed by 24 to 48 hours due to editorial process if huge number of articles comes to publish in single issue.
Automatic notificatation email will be sent to the all users on publication of an issue, so its author’s duty to check their email inbox or SPAM folder to get this notification.
After publication of article author can not withdraw their article.
If editor’s found any issue after publication of article then the NN Publication have the authority to remove the article from online website.
No refund will be provided after online publication of article.
Publication (Print) -
The print copy publication are sent as per the author’s request after 2 weeks of online publication of that issue.
NN Publication will ship the article by India Post and provide the consignment number on dispatch of print copy.
NN Publication follows all the guidelines of delivery provided by IndiaPost and hence not responsible for delay in delivery due to any kind of reasons.
Refund of hard copy will not be provided after dispatch or print of the journal.
NN Publication will be responsible for raise a complain if there is any issue occurs in delivery, but still will not be responsible for providing the refund.
NN Publication will be responsible to resend the print copy only and only if the print copy is lost or print copy is damaged in delivery / or there is delay more than 6 months.
According to India Post the delivery should be completed with in 1-3 weeks after dispatch of articles.
Privacy Policy-
NN Publicationl uses the email ids of authors and editors and readers for sending editorial or publication notification only, we do not reveal or sell the email ids to any other website or company.
