Design and Fabrication of Pedal Powered Washing Machine

Authors

  • G. S. Jagushte Assistant Professor, Mechanical Engineering Department of Rajendra Mane College of Engineering andTechnology, Ambav (Ratnagiri) Mumbai University, India
  • Akashdeep Singh Student, Mechanical Engineering Department of Rajendra Mane College of Engineering and Technology, Ambav (Ratnagiri) Mumbai University, India
  • Gourang Bhatawdekar Student, Mechanical Engineering Department of Rajendra Mane College of Engineering and Technology, Ambav (Ratnagiri) Mumbai University, India
  • Salman Budye Student, Mechanical Engineering Department of Rajendra Mane College of Engineering and Technology, Ambav, (Ratnagiri) Mumbai University, India
  • Nilesh Chiplunkar Student, Mechanical Engineering Department of Rajendra Mane College of Engineering and Technology, Ambav, (Ratnagiri), Mumbai University, India

DOI:

https://doi.org/10.53555/nnmce.v2i3.356

Keywords:

Pedal Power, Washing machine, Electric power, Fabrication, Machine shaft, shortage of electricity

Abstract

The Pedal Operated Washing Machine is the project which is best option for rural area where there is a problem of electric supply or there is shortage of electric supply. To run the washing machine there is a need of electric power and most of villages of India are suffering from this problem and so overcome and to solve this problem we selected washing machine which operated manually. This does not require any electric power supply or diesel supply. This project is low weight and portable so that easily transported. We use the simple cycling mechanism to run the machine shaft.

References

S.M.Moghe and K.S.Zakiuddin, Design and Development of Turmeric Polishing Machine Energized by Human Power Flywheel Motor, A past review proceedings of the 1st International and 16th National Conference on Machines and Mechanisms, IIT Roorkee, India, Dec.18, 2013.

Bruzzon M and Wieler.A. (2010),"Reflecting on a Intercultural Design-Build Project", in the Kathmandu Valley Final Draft, February 5, 2015.

"Bicilavodra", The Pedal Powered Washing Machine, IDEA-2005 Proposal

Published

2015-03-31

Issue

Vol. 2 No. 3 (2015): Journal of Advance Research in Mechanical & Civil Engineering (ISSN: 2208-2379)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

How to Cite

Jagushte, G. S., Singh, A. ., Bhatawdekar, G., Budye, S., & Chiplunkar, N. (2015). Design and Fabrication of Pedal Powered Washing Machine. Journal of Advance Research in Mechanical and Civil Engineering (ISSN: 2208-2379), 2(3), 56-59. https://doi.org/10.53555/nnmce.v2i3.356