Study on Performance of Infill Wall Masnory RCC Frame Using Alternative Types of Bricks: A Review
DOI:
https://doi.org/10.53555/nnmce.v2i3.358Keywords:
Interlocking bricks, base shear, SAP2000. Polymer bricks, PET bottlesAbstract
The purpose of this literature review is to study the reduction of base shear and behavior of masonry in seismic loading and the evolution of interlocking brick methodologies and their different shapes. And also study Arrangement of infill walls with RCC frame in plan and elevation and base shear analysis using SAP2000 software. The study includes use of polymer material as make of polymer brick and study of availability of recyclable polymer material.
References
www.plasticnews.com
IPTS (institute for prospective technological studies) technical proposal, Spain.
Waste plastics recycling a good practices guide by and for local & regional authorities Europe.
Plastics Europe Market Research Group (PEMRG)
ISO 15270 Plastics — Guidelines for the recovery and recycling of plastics waste
Resin codes by American chemistry council
Seismic evaluation of brick masonry infill By Mr. V. P. Jamnekar1, Dr. P. V. Durge published in IJETET in 2013
Influence of Masonry Infill Walls on Seismic Performance of RC Framed Structures a Comparison of AAC and Conventional Brick Infill,” By Vikas P. Jadhao, Prakash S. Pajgade ( published in International Journal of Engineering and Advanced Technology 2013 )
Effect of infill walls in structural response of RC buildings by .I. Idrizi & N. Idrizi ,Z. Idrizi , S. Idrizi ,I. Idrizi ( published in Challenges, Opportunities and Solutions in Structural Engineering and Construction – Ghafoori (ed.) 2010 )
Effect of Infill Walls on Structural Frames By M Harunur Rashid and Sobura Khatun published in ICMPAE'2011
Seismic assessment of symmetrical RC structure with brick masonry infills By V. V. Diware, A. C. Saoji published in International Journal of Engineering Research and Applications 2012
Earthquake Assessment of R/C Structures with Masonry Infill Walls By Marius Mosoarca (published in International Journal of Science Technology 2007)
US patent no. US716865
US patent no. US1420810
US patent no US1431318
US patent no US1581574
US patent no US1984393
US patent no US2142404
US patent no US2185497
US patent no US2641921
US patent no US4314431
US patent no US4597236
US patent no US4854103
US patent no US5379565
US patent no US5901520
Us patent no US7669375
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Terms & Condition
Submission -
Author can submit the manuscript through our online submission process or email us at the designated email id in contact details.
The other mode of submission not accepted than online and email.
Before submission please read the submission guidelines.
NN Publication accepts only article submitted in pdf/doc/docx/rtf file format. Another format except given file formats will no be considered .
Author will be responsible for the error mistakes in the submission files. The minor changes can be done without any cost after publication. But for major changes NN Publication may charges you the editing charges.
Publication (Online) -
The online publication is scheduled on last date of every month, but it can be delayed by 24 to 48 hours due to editorial process if huge number of articles comes to publish in single issue.
Automatic notificatation email will be sent to the all users on publication of an issue, so its author’s duty to check their email inbox or SPAM folder to get this notification.
After publication of article author can not withdraw their article.
If editor’s found any issue after publication of article then the NN Publication have the authority to remove the article from online website.
No refund will be provided after online publication of article.
Publication (Print) -
The print copy publication are sent as per the author’s request after 2 weeks of online publication of that issue.
NN Publication will ship the article by India Post and provide the consignment number on dispatch of print copy.
NN Publication follows all the guidelines of delivery provided by IndiaPost and hence not responsible for delay in delivery due to any kind of reasons.
Refund of hard copy will not be provided after dispatch or print of the journal.
NN Publication will be responsible for raise a complain if there is any issue occurs in delivery, but still will not be responsible for providing the refund.
NN Publication will be responsible to resend the print copy only and only if the print copy is lost or print copy is damaged in delivery / or there is delay more than 6 months.
According to India Post the delivery should be completed with in 1-3 weeks after dispatch of articles.
Privacy Policy-
NN Publicationl uses the email ids of authors and editors and readers for sending editorial or publication notification only, we do not reveal or sell the email ids to any other website or company.
