Improved Design of Automated Plantain Slicing Machine, Using Local Inputs

Authors

  • Osueke G.O. Mechanical Engineering Department, Federal University of Technology, Owerri, Nigeria
  • Obot O. W. Department of Mechanical Engineering, University of Uyo. Nigeria
  • Emeka Opara F. O. National Productivity Centre, Abuja, Nigeria
  • Okata O. J. Mechanical Engineering Department, Federal University of Technology, Owerri, Nigeria

DOI:

https://doi.org/10.53555/nnmce.v3i4.316

Keywords:

Design, automated slicing, fabrication, efficiency, productivity

Abstract

We designed and fabricated an automated plantain slicing machine out of the need to assist industrial plantain Chips Companies to improve the efficiency of their production process. This design consists of 2 blades as against one in the previous models. The machine was tested with some plantain fingers, to compare its performance with the existing models, This machine was used to slice 342 times as against 50 times in the existing model. All components used to produce this machine were sourced locally thereby reducing cost of production. It is believed that the automated slicing machine will enhance the productivity of the sub-sector.

References

Case J. Chilvera A. U (2013), “Structure of Materials,” 2nd edition, Elbs.

Farag M.M (2011) Selection of Materials for Engineering Design; Prentice Hall, New York.

Ibhadode A. O., (2012), “introduction to Manufacturing technology”, 2nd edition, Ambik Press.

Joseph Ajayi, (2013), “Agricultural sciences for West Africa” 2nd edition

James Carnvill, (2011), “mechanical Engineering data Handbook”, Stanley Thornes Publishers Limited. Uk

Khurni R.S. and Gupta J.K (2004); “A Textbook of ; Machine Design”, Eurasis Publishing House (PVT) Ltd Ram Nagar, New Delhi

Nwanekezie C. And Ukagu J. C (2010), “Nigeria Food Journal”, volume 17, pp 55.

Published

2016-04-30

Issue

Vol. 3 No. 4 (2016): Journal of Advance Research in Mechanical & Civil Engineering (ISSN: 2208-2379)

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

You are free to:

  1. Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  2. Adapt — remix, transform, and build upon the material for any purpose, even commercially.
  3. The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

 

How to Cite

G.O., O., O. W., O. ., F. O., . E. O. . ., & O. J., O. . (2016). Improved Design of Automated Plantain Slicing Machine, Using Local Inputs. Journal of Advance Research in Mechanical and Civil Engineering (ISSN: 2208-2379), 3(4), 01-04. https://doi.org/10.53555/nnmce.v3i4.316